Hsun HS394 - Auxiliary DC Jack

5-35 Pre Operation Checks
NOTE: A special wrench can be obtained at a dealer to make this
adjustment.
Standard position: B
A- Minimum (soft)
E- Maximum (hard)
1. Special wrench
WARNING
POTENTIAL HAZARD
Improper shock absorber adjustment.
WHAT CAN HAPPEN
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
accident.
HOW TO AVOID THE HAZARD
Always adjust the shock absorbers on the left
and right side to the same setting.
Auxiliary DC jack
The auxiliary DC jack is located at the front right side of the TRACTOR.
The auxiliary DC jack can be used for suitable work lights, radios, etc.