5-36 Pre Operation Checks
The auxiliary DC jack should only be used when the engine is running.
[1]. Auxiliary DC jack cap
1. Set the light switch to “OFF”.
2. Start the engine, (See pages 6-1—6-2.)
3. Open the auxiliary DC jack cap, and then insert the accessory power plug into the
jack.
[1] Auxiliary DC jack
4. When the auxiliary DC jack is not being used, cover it with the cap.
CAUTION:
⚫ Do not use accessories requiring move than the above maximum capacity. This may
overload the circuit and cause the fuse to blow.
⚫ If accessories are used without the engine running or with the headlights turned on,
the battery will lose its charge and engine starting may become difficult.
⚫ Do not use an automotive cigarette lighter or other accessories with a plug that gets
hot because the jack can be damaged.
Before using this machine, check the following points:
To Next Page
Loading...