8-90 Periodic Maintenance and Adjustment
CAUTION:
In order to prevent clutch slippage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do not
use oils with a diesel specification of “CD
” or oils of a higher quality than specified.
In addition, do not use oils labeled “
ENERGY CONSERVING II” or higher.
Make sure that no foreign material enters
the crankcase.
7. Start the engine and warm it up for
several minutes. While warming up, check
for oil leakage. If oil leakage is found, turn
the engine off immediately and check for the
cause.
8. Turn the engine off, and then check the
oil level and correct it if necessary.
Final gear oil
The final gear case must be checked for
oil leakage before each ride. If any
leakage is found, have a dealer check and
repair the TRACTOR.
Replacing the final gear oil
To Next Page
Loading...