2. PRECAUTIONS AND SAFETY MEASURES
The instrument was designed in compliance with the requirements of R&TTE Directive as
well as of harmonized directives for electronic measuring instruments. Before and during
measurements, carefully observe the following instructions:
•
Do not perform any measurement in humid environments, in the presence of gas or
explosive or inflammable material or in dusty areas.
•
Avoid any contact with the circuit to be tested if no measurements are being carried
out.
•
Avoid any contact with exposed metal parts, with unused measuring leads, circuits, etc.
•
Do not perform any measurement when anomalies are found in the instrument, such as
deformations, breaks, substance leaks, no display view, etc.
•
Only use HT original accessories.
In this manual, the following symbol is used:
In accordance with the recommendations of the European Council
1995/519/EC and the standard EN62311, the instrument can be used
safely while you are holding it in your hands. Under this circumstance
power levels with 2.4GHz transmission are thoroughly covered as per the
basic restrictions for human exposure to RF according to the above
mentioned European rules
Warning: observe the instructions reported in the manual. An improper use
could damage the instrument or its components
To Next Page
Loading...