HTC 800 Classic Usage
1.0 13
Note!
Always dismantle the weights when you change tools, to make tipping the
machine easier.
Warning!
There is a risk of crush injuries when handling the weights, as these are heavy.
Therefore, the weights should always be handled with great care.
Figure 4-2. Handling weights
4.4 Access to grinding tools
Warning!
Always remove the weights before changing tools, to prevent the machine from
tipping back.
Warning!
The tool becomes very hot during use. Tip the machine back and allow it to
stand for a short while. Use protective gloves when removing the tools.
Warning!
Disconnect the electrical supply, when changing tools or repairing the machine.
To Next Page
Loading...
