Need help?Do you have a question about the HTC 2500 iX and is the answer not in the manual?
Summary of the HTC 2500 iX's capabilities and design philosophy.
Disclaimer regarding accuracy and right to change descriptions.
Guidelines for safe travel and transportation of the machine.
Explanation of CE marking and its guarantee of free movement within the EU.
Manufacturer's declaration of product conformity with EU directives.
Crucial safety guidelines for operating the machine, especially on slopes.
Guidelines to prevent fires and explosions related to fuels, oils, and batteries.
Labeled diagram of the machine's front components.
Labeled diagram of the machine's rear components.
Diagram showing the placement of all controls within the operator's cab.
Diagram identifying components located on the machine's left side.
Diagram identifying components located on the machine's right side.
Pre-operation checks and daily maintenance procedures.
Step-by-step instructions for safely starting the engine.
Instructions on controlling the machine's movement and steering.
Procedures for operating the grinding function, including head positioning.
Correct procedures for stopping the engine, including normal and emergency shutdowns.
Routine daily checks and maintenance procedures.
Maintenance tasks to be performed every 500 hours or annually.
Maintenance tasks to be performed every 2000 service hours.
Maintenance tasks to be performed every 2 years.
List of error codes and their explanations for the control panel.
Troubleshooting steps related to the machine's power system and fuses.
Details on engine emissions certification and warranty coverage.
To Next Page
General
