HTC 2500 iX - Maintenance Section; Refill Capacities

SEBU7833-03 37
Maintenance Section
Refill Capacities
Maintenance Section
Refill Capacities
i02198350
Refill Capacities
Lubrication System
The refill capacities for the engine crankcase
reflect the approximate capacity of the crankcase
or sump plus standard oil filters. Auxiliary oil filter
systems will require additional oil. Refer to the OEM
specifications for the capacity of the auxiliary oil filter.
Refer to the Operation and Maintenance Manual,
“Maintenance Section” for more information on
Lubricant Specifications.
1104 Engine
Table 5
1104 Engine
Compartment or System
Liters
Quarts
Standard Oil Sump for the Engine
Crankcase
(1)
6.5 7
(1)
These values are the approximate capacities for the cra nkcase
oil s ump w hich include the s tandard factory installed oil filters.
Engines with auxiliary oil filters will require additional oil. Refer
to the OEM specifications for the cap acity of the aux iliary oil
filter.
1103 Engi
ne
Table 6
1103 Engine
Compartment or System Liters Quarts
Standard Oil Sump for the Engine
Crankcase
(1)
6.5
7
(1)
These values are the approximate capacities for the cra nkcase
oil s ump w hich include the s tandard factory installed oil filters.
Engines with auxiliary oil filters will require additional oil. Refer
to the OEM specifications for the cap acity of the aux iliary oil
filter.
Cooling System
To maintain the cooling system, the Total Cooling
System capacity must be known. The approximate
capacity for the engine cooling system is listed
below. External System capacities will vary among
applications. Refer to the OEM specifications for the
External System capacity. This capacity information
will be needed in order to determine the amount
of coolant/antifreeze that is required for the Total
Cooling System.
11 04 Engine
Table 7
1104 Naturally Aspirated Engine
Compartment or System Liters Quarts
Engine Only 10.4 11
External co
oling system capacity
(OEM recommendation)
(1)
Total Cooling System
(2)
(1)
The external c ooling system includes a radiator or an
expansion tank with the following components: heat exchanger,
aftercooler, and piping. Refer to the OEM specifications. Ente r
the value for the external system capacity in this row.
(2)
The Total Cooling System includes the capacity for the engine
cooling system plus the capacity for the external cooling
system. Enter the total in this row.
Table 8
1104 Turbocharged Engine
Compartment or System Liters Quarts
Engine Only 11.4 12
External cooling System capacity
(OEM recom
mendation)
(1)
Total Cooling System
(2)
(1)
The external c ooling system includes a radiator or an
expansion tank with the following components: heat exchanger,
aftercooler, and piping. Refer to the OEM specifications. Ente r
the value for the external cooling system capacity in t his row.
(2)
The Total Cooling System includes the capacity for the engine
cooling system plus the capacity for the external cooling
system. Enter the total in this row.
This document is printed from SPI². Not for Resale.