32
Operation
Starting the engine
WARNING: Do not use aerosol types of starting aids such
as ether. Such use could result in an explosion and per-
sonal injury.
WARNING: If you need to shut the engine off at any time
to avoid injury or damage, use the EMERGENCY STOP
button. Simply turning off the key will not stop the engine
immediately.
NOTICE: Do not crank the engine for more than 30 sec-
onds. Allow the electric starter motor to cool for two min-
utes before cranking the engine again.
1. Ensure that the main switch (see gure below) has been
engaged for at least 5 seconds.
2. Check that the machine’s doors and covers are closed
and locked so that no personnel can be injured.
3. Turn off the Conditioning (see gure below)
0
I
II
II
I
OK
Steer
ing
Grind
ing
OFF
ON
OFF
ON
OFF
Off
ON
On
OFF
ON
OK
V
AC
C
on
trol
Ignition
Grinding
Head
D
O
W
N
U
P
Grinding
Speed
Warning
Main Power
Electr
ic
Power
M
ain pow
e
r O
n
M
a
in
p
o
w
e
r
S
y
s
te
m
R
e
a
d
y
HTC 2500 iX
0
I
II
III
OK
Steer
ing
Grinding
OFF
ON
OFF
ON
OK
To Next Page
Loading...
