10
Vibration and noise
The machine has been tested in accordance with the ISO 8662-4 and ISO 11202 standards for vibration and noise. For vi-
brations, the average value is 1.01 m/s², which applies when the machine is being accelerated. The sound level at the ma-
chine during operation is approx. 105 dBA. This value varies depending on the choice of tool and the type of oor. The sound
level in the operator’s environment is approx. 76 dBA. Always use hearing protection.
Machine name plate
The model number and serial number for your machine are shown on the machine name plate. This information is required
when ordering spare parts for the machine. Use the space below to make a note of the model number and serial number of
your machine for future reference.
MODEL NUMBER _______________________________________________________
SERIAL NUMBER _________________________________________________________
KEY NUMBER _______________________________________________________
On delivery
The following items will be included in the delivery. Contact your retailer if anything is missing.
• Grinding machine
• Splash guard
• Manual
• Key
To Next Page
Loading...
