HTC 2500 iX - Operation; Operating the Machine

34
Operation
WARNING: If people are to spend time in the vicinity of the
machine while the grinding heads are folded up, the grind-
ing heads must be secured with the accompanying safety
chain. A falling grinding head can result in serious personal
injury.
WARNING: If there machine is to be reversed and there is
a risk of colliding with people or equipment, a person with
a clear view outside the machine must be used as a re-
versing supervisor.
NOTICE: After the engine has been started, wait for 3
minutes before loading the engine with grinding and/or
vacuum cleaner. This is to allow the engine to reach the
correct working temperature.
0
I
II
III
OK
Steer
ing
Grind
ing
OFF
ON
OFF
ON
OFF
Off
ON
On
OFF
ON
OK
V
AC
Con
trol
Ignition
Grinding
Head
D
O
W
N
U
P
Grinding
Speed
Warning
Main Power
Electr
ic
Power
M
ain
powe
r O
n
M
a
in
p
o
w
e
r
S
y
s
te
m
R
e
a
d
y
HTC 2500 iX
0
I
II
III
OK
Steer
ing
Grind
ing
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OK
VAC Control
Ignition
Grinding Head
DOWN
UP
Grinding
Speed
Operating the machine
WARNING: If you need to shut the engine off at any time
to avoid injury or damage, use the EMERGENCY STOP
button (see gure below). Simply turning off the key will
not stop the engine immediately.
Correct operation and maintenance are key factors in ob-
taining the maximum life and economy from the machine. If
the directions in this manual and the attached manuals are
followed, costs can be minimised and component service life
can be maximised.