HTC 2500 iX - Operation

36
in the OPERATION menu.
The left-hand control governs the forwards/backwards
speed, and the right-hand control turns the machine (see
gure below). If the right-hand control is released when driv-
ing forwards, the machine will continue straight ahead. If the
same control is released when driving backwards, the steer-
ing system adjusts the movement so that the articulated joint
maintains the same angle until the control is activated again.
The current angle of the articulated joint can easily be moni-
tored in the display, which makes reversing easier.
Operation
0
I
II
III
OK
Steering
Grinding
OFF
ON
OFF
ON
OFF
Off
ON
On
OFF
ON
OK
VAC Control
Ignition
Grinding
Head
DOWN
UP
Grinding
Speed
Warning
Main Power
Electric
Power
Main power
On
Main
po
wer
Syst
em
R
eady
HTC 2500 iX