HTC 800 Classic - Table of Contents

HTC 800 Classic Table of contents
i
1 Introduction 1
1.1 General ............................................................................ 1
1.2 Responsibility .................................................................. 1
1.3 Manual ............................................................................. 1
1.3.1 Safety instructions – Explanation of symbols ..... 1
1.4 Transportation ................................................................. 2
1.5 On delivery ...................................................................... 2
1.6 Unpacking the machine ................................................... 2
1.7 Machine name plate ........................................................ 3
1.8 Handling and storage ...................................................... 3
1.9 Vibration and noise .......................................................... 3
1.9.1 Hand and arm vibrations .................................... 4
1.9.2 Sound pressure level .......................................... 4
2 Safety 5
2.1 General Information ......................................................... 5
2.2 Warnings ......................................................................... 5
2.3 Notes ............................................................................... 6
3 Machine description 8
3.1 General machine description ........................................... 8
3.2 Description of controls – Control panel ........................... 9
4 Usage 11
4.1 General Information ......................................................... 11
4.2 Handle settings ................................................................ 11
4.3 Handling weights ............................................................. 12
4.4 Access to grinding tools .................................................. 13
4.5 Fitting and replacing grinding tools .................................. 14
4.5.1 Fitting grinding tools ........................................... 15
4.5.2 Changing grinding tools ...................................... 16
4.6 Preparations for dry grinding ........................................... 16
4.7 Preparations for wet grinding .......................................... 17
4.8 Operation ......................................................................... 18
4.8.1 Standby .............................................................. 18
4.8.2 Emergency stop switch ...................................... 18
4.8.3 Starting the machine .......................................... 18
4.9 Making operation easier .................................................. 19