4. Do the following to place your nano SIM and microSD cards into the tray:
With the gold contacts facing down, place two nano SIM cards into the SIM 1 and SIM 2
holders of the tray. Make sure to align the cut-off corners to the notches on the holders.
Both SIM 1 and SIM 2 cards can be 4G LTE cards.
To find out how to set the preferred card for your
mobile data connection, see Managing your
nano SIM cards with Dual network manager on
page 18.
When you need to use a microSD card, remove your second nano SIM card and then place the
microSD card on the SIM 2/SD holder. You cannot have both the second nano SIM card and
the microSD card inserted at the same time.
5. When reinserting the tray, make sure it is facing up so that your cards don't fall out. With the
outer card holder between your fingers, steadily slide the tray all the way into the slot.
6. Make sure the tray is fully inserted and doesn't protrude from the slot.
Follow the same procedure above to eject the tray and remove your cards. Before ejecting the tray,
make sure to unmount your microSD card first. See Unmounting the storage card on page 77.
14 Unboxing and setup
To Next Page
Loading...
