3. Tap Wi-Fi.
Detected Wi‑Fi networks will be listed.
If the wireless network that you want is not listed, tap > Add network to manually
add it.
4. Tap the Wi‑Fi network you want to connect to. If you selected a secured
network, you'll be asked to enter the network key or password.
5. Tap Connect. You'll see the Wi‑Fi icon in the status bar when connected.
The next time HTC Desire 600 connects to a previously accessed secured wireless
network, you won’t be asked to enter the key or other security information again.
Preventing notifications from unsecured Wi-Fi networks
You can prevent getting notified by unsecured Wi-Fi networks.
1. Slide the Notifications panel open, and then tap .
2. Tap the Wi-Fi On/Off switch to turn Wi‑Fi on.
3. Tap Wi-Fi.
Detected Wi‑Fi networks will be listed.
4. Press and hold an unsecured Wi‑Fi network you want stop being notified about,
and tap Block network notification.
5. To unblock an unsecured Wi‑Fi network, press and hold the network name and
tap Unblock network notification.
Connecting to a Wi‑Fi network via WPS
If you're using a Wi‑Fi router with Wi‑Fi Protected Setup (WPS), you can connect
HTC Desire 600 easily.
1. Slide the Notifications panel open, and then tap .
2. Tap the Wi-Fi On/Off switch to turn Wi‑Fi on.
3. Tap Wi-Fi.
4. Tap > WPS Push, and then press the WPS button on your Wi‑Fi router.
To use the Wi‑Fi Protected Setup (WPS) PIN method, tap
> WPS Pin Entry.
151 Internet connections
To Next Page
Loading...
