Web and Data 121
Before you can connect to your organization’s local network, you may be asked to:
● Install security certificates
● Enter your login credentials
● Download and install a required VPN app on your phone
Contact your network administrator for details. Also, your phone must first establish a Wi‑Fi or
data connection before you can start a VPN connection. For information about setting up and
using these connections on your phone, see Data Services General Information – 4G LTE and
3G Networks.
Add a VPN Connection
You must first set a lock screen PIN or password before you can use credential storage and set
up the VPN.
1. With two fingers, swipe down from the status bar, and then touch .
2. Under Wireless & networks, touch More > VPN.
3. Touch > Add VPN profile.
4. Enter the VPN settings and set them up according to the security details your network
administrator gave you.
5. Touch SAVE.
Connect to a VPN
After you’ve added a VPN connection, you are now ready to connect and access that network.
1. With two fingers, swipe down from the status bar, and then touch .
2. Under Wireless & networks, touch More > VPN.
3. Touch the VPN that you want to connect to.
4. Enter your login credentials, and then touch CONNECT. When you are connected, the
VPN connected icon appears in the notification area of the status bar.
You can then open the Web browser to access resources such as your corporate network
intranet. For more information, see Browse the Web.
Disconnect From a VPN
Disconnect from the VPN when you’re done accessing your intranet sites.
1. Slide the Notifications panel open.
To Next Page
Loading...
