Settings 200
1. With two fingers, swipe down from the status bar, and then touch > Apps.
2. Slide to the ALL tab and select the app that you want to disable.
3. Touch Disable.
Encrypt Data on Your Phone
On the phone storage, you can encrypt data such as your accounts, settings, downloaded apps
and their data, media, and other files. On a storage card, you can only encrypt files.
Set a lock screen PIN or password before start encryption. Fully charge the battery and keep
your phone connected to the power adapter during encryption. This process takes may take
about an hour or so.
You cannot undo encryption on the phone storage. If you want to return to an unencrypted
phone, you must perform a factory reset. Once you enable storage card encryption, only new
files added after encryption will be encrypted. Files already on the card will not be encrypted.
Also, storage card encryption doesn't reformat or erase your card. Encrypted files on the
storage card can only be opened by the phone that encrypted them.
How to Encrypt Data on Your Phone
1. With two fingers, swipe down from the status bar, and then touch > Storage.
2. Touch Phone storage encryption. Or, touch Encrypt SD card content.
3. Touch NEXT.
4. Enter the lock screen PIN or password, and touch NEXT.
5. Touch ENABLE ENCRYPTION
During phone storage encryption, the phone may restart a few times. When storage encryption
is complete, enter your PIN or password.
Note: If you turn off SD card encryption to stop encrypting new files, previously encrypted files
will remain encrypted. To access these files, you must enable encryption again for your storage
card.
Power Settings
Use the Power settings to check the phone’s battery, enable Power saver mode, and more.
Optimize Battery Life with Power Saver Mode
Power saver mode helps to increase battery life. It reduces the usage of phone features that
drain the battery such as the display and data connection.
1. With two fingers, swipe down from the status bar to open the Quick Settings panel.
To Next Page
Loading...
