How to troubleshoot low voltage to the radio receiver on my HTC DURATIQ X6 Floor Machine?
To troubleshoot low voltage to the radio receiver on your HTC Floor Machine, check the control voltage, battery voltage, and cabling to the radio receiver.
What does a phase error on the incoming supply mean for my HTC DURATIQ X6?
A phase error on the incoming supply of your HTC Floor Machine means that the incoming supply has lost one or more phases. Check the incoming supply.
How to troubleshoot low control voltage on my HTC DURATIQ X6 Floor Machine?
To troubleshoot low control voltage on your HTC Floor Machine, check the PSU and the battery voltage.
How do I check if the grinding motor is short-circuited on my HTC Floor Machine?
To check if the grinding motor is short-circuited on your HTC Floor Machine, inspect the grinding motor cabling and measure the insulation of the grinding motor.
How to check for a break in the grinding motor or cabling of my HTC DURATIQ X6?
To check for a break in the grinding motor or its cabling on your HTC Floor Machine, inspect the grinding motor cabling and measure the grinding motor.
What to do if my HTC Floor Machine will not start?
If your HTC Floor Machine won't start, there are several potential causes: * A fault on the power supply: Check the voltage on the incoming phase/phases. * The power supply indication is not lit: Check the miniature circuit breaker F1. * The main circuit board is not lit: Check the fuse. * The standby LED on the control panel is not lit: Check fuses F2 and F8.
What should I do if the grinding motor is overheated on my HTC DURATIQ X6 Floor Machine?
Let the motor cool down if the grinding motor is overheated on your HTC Floor Machine.
What to do if the converter is overloaded on my HTC DURATIQ X6?
If the converter is overloaded on your HTC Floor Machine, let the machine cool down.
What to do if the cooling flange for the frequency converter is overheated on my HTC DURATIQ X6?
If the cooling flange for the frequency converter is overheated on your HTC Floor Machine, let the frequency converter cool down.
What should I do if the grinding motor on my HTC DURATIQ X6 Floor Machine becomes overloaded?
If the grinding motor becomes overloaded and the overload meter reaches 100% on your HTC Floor Machine, let the machine cool down.
General| Brand | HTC |
|---|---|
| Model | DURATIQ X6 |
| Category | Floor Machine |
| Language | English |
To Next Page
