To Next Page
D
dpearsonSep 5, 2025
How to troubleshoot low control voltage on my HTC DURATIQ X6 Floor Machine?
- TTyler MeyerSep 5, 2025
To troubleshoot low control voltage on your HTC Floor Machine, check the PSU and the battery voltage.
How to troubleshoot low control voltage on my HTC DURATIQ X6 Floor Machine?
To troubleshoot low control voltage on your HTC Floor Machine, check the PSU and the battery voltage.
What does a phase error on the incoming supply mean for my HTC DURATIQ X6?
A phase error on the incoming supply of your HTC Floor Machine means that the incoming supply has lost one or more phases. Check the incoming supply.
How to troubleshoot low voltage to the radio receiver on my HTC DURATIQ X6 Floor Machine?
To troubleshoot low voltage to the radio receiver on your HTC Floor Machine, check the control voltage, battery voltage, and cabling to the radio receiver.
How to troubleshoot low voltage to the left drive motor on my HTC DURATIQ X6 Floor Machine?
To troubleshoot low voltage to the left drive motor on your HTC Floor Machine, check the control voltage, battery voltage, cabling to the drive motors, and voltage on relay outputs.
General| Brand | HTC |
|---|---|
| Model | DURATIQ X6 |
| Category | Floor Machine |
| Language | English |
Explanation of warning, note, and tip symbols used in the manual.
General safety rules for machine operation and user responsibility.
Explanation of danger, warning, and caution decals on the machine.
Identification and function of controls on the machine's Human-Machine Interface.
Explanation of indicators and data displayed on the machine's information panel.
Instructions for operating the machine using the control panel.
Detailed steps for manual grinding operations using the control panel.
Explanation of the emergency stop switch function and reset procedure.
Detailed explanation of the remote control's buttons and functions.
Instructions for connecting and using the remote control for machine operation.
General safety precautions for maintenance and repair.
Introduction to fault descriptions, causes, and user actions.
Troubleshooting steps for a machine that fails to start.
Troubleshooting steps for frequent fuse or earth fault breaker trips.
Explanation of warning messages displayed on the machine and remote control.
