In addition to the above, you can customize squeeze gestures to perform certain actions in an app.
See Assigning in-app actions to squeeze gestures on page 43.
Double-tap gesture
Double-tap either the lower-left or lower-right side using your thumb, depending on which hand
you usually use to hold your phone. Try touching the area with more surface of your thumb to more
easily trigger the double-tap feature. You can also adjust the double-tap sensitivity level .
For details, see Edge Sense double-tap gesture on page 44.
Holding gesture
Edge Sense allows your screen to remain on and keep its orientation while you're holding the phone.
For details, see Edge Sense holding gesture on page 45.
Setting up Edge Sense for the first time
If you didn't set up Edge Sense when you first set up your phone, you can do it in Settings.
1. From the Home screen, swipe up and then tap Settings
Edge Sense.
The Edge Sense setup screen will also appear automatically when you squeeze the lower
sides of your phone the first time.
2. Set your squeeze strength by following the onscreen instructions.
The first-time setup of Edge Sense activates the short squeeze gesture which, by default, is set to
launch the Camera app and take shots. See Taking camera shots using Edge Sense on page 40. To
assign another action or app, see Changing the actions assigned to squeeze gestures on page 41.
38 Pressure-sensitive buttons and Edge Sense
To Next Page
Loading...
