Usage
HTC GL
270/400/450/550
14 1.0
Warning!
Always ensure that the machine's connection cable is hanging freely without
any tensile loading. Otherwise, the cable, coupling socket and plug may be
damaged, which can cause both physical damage and personal injury.
Warning!
Connect the machine to an earth fault breaker.
Tip!
Check the minimum recommended cable area before using an extension cord.
You will find the recommended cable area under Technical data, page 30.
4.2 Handle settings
The picture below shows the handle positions on the machine.
Figure 4-1. Handle settings
1. Upright position - used when tipping the machine to ease access to the
underside of the grinding head, e.g. when changing tools
2. Working position - the working height can be adjusted to one of several
positions with the machine's adjustable handle
To Next Page
Loading...
