Usage
HTC GL
270/400/450/550
24 1.0
4.9.3 Positions for Edge Grinder Adapter
The grinding head can be attached in the right, left or centre position on the edge
grinder adapter. This gives the option to grind edges and corners effectively from
different directions.
Change between left and right position:
• Detach the grinding head from the edge grinder adapter.
• Slightly loosen the locking knob, see position 1 in Figure 4-9, page 24.
• Turn the hoop 180°, see position 2 in Figure 4-9, page 24. Then firmly lock
the locking knob (Figure 4-10, page 24).
Figure 4-9. Turning the hoop, left - right
Figure 4-10. Hoop in right-hand position
Place in the centre position (Figure 4-11, page 25):
To Next Page
Loading...
