220 Chapter 11 Finding and Recording Places
4. When the GPS position is displayed on the screen, you can now
take a photo of your place of interest.
Tips Before taking a photo, you can:
• Tap the onscreen Flash Light button to choose a flash mode. For
more information about the differences between the flash modes,
see “Using the flash light” in Chapter 12.
• Change brightness and white balance settings. Tap Menu >
Brightness or White Balance, and choose a setting.
• Set Footprints to separately save a large, high-resolution photo.
Tap Menu > Settings and select the Save a large photo in Albums
during capture check box.
5. Tap the Virtual Camera button ( ) to take the photo.
6. Footprints then displays the captured photo, with several buttons
at the bottom of the screen that allow you to do the following:
54321