162 Getting Connected
10.5 GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send
and receive MMS messages on your device. You will need a data plan to use
your wireless service provider’s GPRS/3G network. Check with your wireless
service provider to find out about GPRS/3G rates.
GPRS/3G settings are already preconfigured on your device, and your device
is ready to use your wireless service provider’s GPRS/3G services. Do not
change the settings as this may cause services to stop working..
To add a new GPRS/3G connection
In times when you need to add another GPRS/3G connection on your
device, obtain the Access point name from your wireless service provider.
Also, check if a user name and password are required.
1. Tap Start > Settings > Connections tab > Connections.
2. Under My ISP, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the
connection.
4. In the Select a modem list, select Cellular Line (GPRS , 3G), then tap
Next.
5. Enter the Access point name, then tap Next.
To Next Page
Loading...
