Getting Started 27
1.3 Installing a Storage Card
Your device comes with two storage card slots: one is at the top, while the
other one is at the right side of the device. To have additional storage for
your images, videos, music, and data files, you can purchase SD
TM
memory
cards and install them in these slots.
To insert an SD card
1. Pry open the rubber that covers the storage card slot.
SD card slot
2. Insert the SD card into the slot with the gold contacts facing down.
3. Replace the rubber cover.
Note To remove the SD card, press the SD card to eject it from the slot.
1.4 Starting Up
After installing your SIM card and battery and charging the battery, you can
now power on and start using your device.
Turn your device on and off
To turn on the power
Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Setup Wizard
will guide you through the calibration process and the setup of regional
settings, date and time, and password. For more information about touch
screen calibration, see “Calibrate the device” later in this chapter.
To Next Page
Loading...
