230 Using Other Applications
1
2 3
4 5 6
1 Tap to open the GPRS Monitor screen where you can set up monitoring, view
cost and traffic charts, and generate reports..
2 Tap inside the control bar to adjust the backlight level.
3 This is the battery power monitor. Tap it to access the Power Settings screen.
4 Tap to toggle between connecting or disconnecting your default data
connection.
5 Tap to open Internet Explorer Mobile.
6 Tap to open Messaging.
The GPRS Monitor icon and pop-up window
Another way of displaying status information visually is by enabling the
GPRS Monitor icon to be shown on the title bar. This icon shows the GPRS/
dial-up connection speed, data traffic, and battery status.
To show the GPRS Monitor icon on the title bar
1. Tap Start > Programs > Spb GPRS Monitor.
2. Tap Tools > Options > Icon tab.
3. Select the Show taskbar icon check box.
By default, the GPRS Monitor icon shows three bars that represent the
following status information:
Icon Bar 2: Traffic
(Full bar corresponds to
100%. Each bar is 20%.)
Icon Bar 3: Battery
(Each bar corresponds to
20% of the total charge.)
Icon Bar 1: Speed
(Full bar corresponds
to 19KB/sec.)
To Next Page
Loading...
