Quick Start Guide 13
Remove the device from the holder
1. Pull the upper edge of the cradle
slightly upwards, and with your fingers
in the hole behind the cradle, push so
that the device clicks out.
2. Lift the device out of the cradle,
holding it firmly.
8. Starting Up
After installing your SIM card and battery and charging the battery, you can now
power on and start using your device.
Turn on the power
Press the POWER button.
A Quick Start Wizard guides you through the calibration of the screen and
the setup of time zone, date and time, and password. Follow the onscreen
instructions to finish the Quick Start Wizard. After the Quick Start Wizard
finishes, the device installs customization settings, then restarts.
1.
2.
To Next Page
Loading...
