Quick Start Guide 43
30. Resetting Your Device
If you experience some sluggishness with your device, you can perform a reset
to shut down all programs and restart your device.
To perform a soft reset
1. Pull out the stylus.
2. Remove the back cover.
3. Use the stylus tip to press the red RESET button
located at the upper-right corner next to the
battery compartment.
You can also perform a hard reset. After a hard reset, the device is restored to
its default settings—the way it was when you first purchased your device
and turned it on. Only Windows Mobile® software and other pre-installed
programs will remain after a hard reset.
To learn how to perform a hard reset, refer to the “Managing Your Device”
chapter in the User Manual PDF.
To Next Page
Loading...
