20 Quick Start Guide
Notes • Automatic sets your device to vibrate only when you receive phone calls during
scheduled appointments in your Calendar.
• If your device has been set with the alarm clock and you set the profile to Vibrate
or Silent mode, you will not hear any sound from the alarm. To enable the alarm
sound, make sure you turn on the Alarm Sound option on the Sound Profiles
screen.
Wallpaper
You can change the background image of the Home tab.
On the Home screen, slide to the Settings tab and then tap Wallpaper.
On the Select a Picture screen, navigate to the folder where the image you
want to use is located. When you have found the desired image, tap the
image to set it as the wallpaper for the Home tab.
Device lock
Enabling device lock requires you to enter a password to unlock your device
after it has been left idle for a set period of time.
On the Home screen, slide to the Settings tab
and then tap All Settings.
On the Personal tab, tap Lock.
Select the Prompt if device unused for check
box and choose the time to elapse before your
device requires password entry.
Select the Password type.
Enter and confirm the password and then tap
OK.
1.
2.
3.
4.
5.
1.
2.
To Next Page
Loading...
