SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
Use the correct external power source
A product should be operated only from the type of power source indicated on
the electrical ratings label. If you are not sure of the type of power source required,
consult your authorized service provider or local power company. For a product that
operates from battery power or other sources, refer to the operating instructions
that are included with the product.
Handle battery packs carefully
This product contains a Li-ion battery. There is a risk of fire and burns if the battery
pack is handled improperly. Do not attempt to open or service the battery pack. Do
not disassemble, crush, puncture, short external contacts or circuits, dispose of in
fire or water, or expose a battery pack to temperatures higher than 60˚C (140˚F).
WARNING: Danger of explosion if battery is incorrectly
replaced. To reduce risk of fire or burns, do not disassemble,
crush, puncture, short external contacts, expose to
temperature above 60° C (140° F), or dispose of in fire or water.
Replace only with specified batteries. Recycle or dispose of
used batteries according to the local regulations or reference
guide supplied with your product.
Take extra precautions
Keep the battery or device dry and away from water or any liquid as it may cause
a short circuit.
Keep metal objects away so they don’t come in contact with the battery or its
connectors as it may lead to short circuit during operation.
The phone should be only connected to products that bear the USB-IF logo or
have completed the USB-IF compliance program.
Do not use a battery that appears damaged, deformed, or discolored, or the one
that has any rust on its casing, overheats, or emits a foul odor.
•
•
•
•
•
•
•
To Next Page
Loading...
