216 Experiencing Multimedia
• Time Stamp (Photo and GPS Photo mode). Choose whether to include the
shooting date and time on captured photos.
• Storage. Select where you want to save your files. You can either save the files
to the main memory or to a storage card if one is installed.
• Keep Backlight. Turn the backlight on or off. This overrides your device
backlight settings while you are using the camera.
• Shutter Sound. Choose whether you want the camera to make a shutter
sound when you press the ENTER button.
• Image Properties. This option lets you adjust the image Contrast,
Saturation, and Sharpness.
1 Tap a property to adjust.
2 Tap to reset all properties to their default
values.
3 Tap to save the settings.
4
Tap / or press Navigation Right/
Left (Landscape orientation) to increase/
decrease the value.
5 Tap to close the Image Properties screen
without applying and saving the changes.
2
3
4
1
5
• Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply
to your photos or video clips.
• Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
Choose either Center Area to measure light using the center area of the
subject, or Average to measure light using the area around the subject.
To Next Page
Loading...
