Getting Started 33
1.5 Using the In-car Holder
Assemble and install the supplied in-car holder so you can use your device while
inside a vehicle.
Assemble the in-car holder
1. Insert the base tabs into the
holes on the cradle.
2. Slide the cradle downward until
the base tabs lock into place.
Warning! When sliding the cradle
downward, do not exert
too much pressure on the
top or bottom cradle lock
to avoid damaging it.
Cradle
Base tabs
Base
Mount the in-car holder
1. Press the in-car holder suction
cup on a dry and smooth surface
such as the inside windshield of
your car.
2. Push the suction cup lever to
attach the suction cup firmly on
the surface.
1 2
Warning! Make sure that the suction cup is firmly attached to the surface. Otherwise, it may
detach and damage your device.
To Next Page
Loading...
