14 Quick Start Guide
To install the storage card
Insert the microSD card into the slot with its gold contacts facing
down.
Note To remove the microSD card, press it to eject it from the slot.
5. Charging the Battery
New batteries are shipped partially charged. Before you start using your device, it is recommended that
you charge the battery.
To charge the battery
Connect the USB connector of the AC adapter to the sync
connector on your device.
Plug in the AC adapter to an electrical outlet to start charging
the battery.
The battery is fully charged after about 3 hours of charging.
Note Only the AC adapter and USB sync cable provided with your
device must be used to charge the device.
1.
2.
Charging is indicated by a “breathing” white light around the Navigation Control. As the battery is being
charged while the power is on, a charging icon also appears in the title bar of the Home screen. After
the battery has been fully charged, the Navigation Control LED shows a solid white light and a full battery
icon appears in the title bar of the Home screen.
To Next Page
Loading...
