Inserting the microSD card
1. Hold the phone face up.
2. Insert the tip of the tray eject tool that came with your phone—or a small bent paperclip—
into the tray eject hole.
Do not insert the tip of the tray eject tool into the microphone hole. This may damage the water-
resistant microphone mesh and invalidate the warranty.
3. Push the tip all the way into the hole until the tray ejects, and then pull the tray out.
4. Place your microSD card—gold contacts facing down and narrow side facing in—into the SD
holder of the tray.
19 Unboxing and setup
To Next Page
Loading...
