1. Go to Settings, and then select Connectivity Wi-Fi (2.4/5 GHz).
Nearby 2.4 GHz and 5 GHz Wi-Fi networks will be listed.
2. Select the Wi-Fi network to connect to.
3. Enter your login credentials, configure your network settings, and then select Connect.
Your selected network will then connect. Your previous network will remain saved, so you can
easily reconnect to it later.
§ To access Wi-Fi settings, you can also press the VIVE button on the right controller, and then
select More Wi-Fi.
§ If the network you want to use is not listed, try adding it manually by selecting Add Network.
Adding a VPN
Add virtual private networks (VPNs) so you can connect and access resources inside a local
network remotely, such as your corporate or home network.
Before you can connect your headset to your VPN, you may be asked to:
§ Install certificates.
§ Enter your credentials.
§ Download and install a required VPN app, such as for connecting to a secured enterprise
network. Contact your network administrator or VPN provider for details.
To add a VPN:
1. If you're currently running an app, press the VIVE button on the right controller, and then
select Back to Lobby.
2. From the Lobby, select Settings.
3. Select Connectivity
VPN, and then select Add VPN.
4. Enter VPN settings according to the instructions from your organization, network
administrator, or VPN provider.
5. Select Save.
Connecting to a VPN
1. If you're currently running an app, press the VIVE button on the right controller, and then
select Back to Lobby.
2. From the Lobby, select Settings.
3. Select Connectivity VPN.
4. Select the VPN you'd like to connect to. If none are shown, see Adding a VPN on page 33.
To disconnect from a VPN connection, select the VPN connection, and then select Disconnect.
33 Settings
To Next Page
Loading...
