HTC Vive Focus 3 - VMware AirWatch Enrollment

VMware
Setting up VMware AirWatch agent and enrolling VIVE Focus 3 using a QR code
You can create and use a QR code to automatically set up Wi-Fi, install the VMware AirWatch
®
agent from a specified URL, and enroll VIVE Focus 3.
Here's how:
1. On your computer's web browser, go to a website that can generate QR codes.
For example: https://www.the-qrcode-generator.com/
2. Configure your QR code with the following data:
§ Headset setup:
Parameter Description
wifi Wi-Fi configuration. For details, see the "Wi-Fi settings" table.
url Download link for VMware AirWatch
oobe Configuration for specifying what to include in the headset setup
process:
0: Include the complete setup process
1: Include only room setup and first-time controller setup
2: Skip the entire headset setup process
extras For details, see the "Additional data" table.
The download link for VMware AirWatch is https://getwsone.com/mobileenrollment/
airwatchagent.apk. Make sure the URL is accessible before generating your QR code.
§ Wi-Fi settings:
Parameter
Description
WIFI Authentication type (for example: WPA2-EAP, WPA)
S Network SSID
P Network password
I Identity
§ Additional data:
You can include the following data as needed when automatically enrolling VIVE
Focus 3 with the VMware AirWatch agent:
Parameter
Description
svr Server URL
gid Group ID
52 Mobile Device Management (MDM)