When you hear the click, this means that the face cushion is now locked to the headset.
Turning on the headset
1. Charge the headset using the USB Type-C cable and power adapter. See Charging the
headset on page 12.
2. After charging, press and hold the Power button for a few seconds to turn it on.
When the headset is on and you take it off, it goes into Sleep mode where the display turns off
to save battery power. The display will automatically turn on when you put the headset back on
again.
Turning off the headset
1. While wearing the headset, press and hold the Power button for around 3 seconds to open
a menu onscreen.
2. Select Power off on the menu.
You can also turn off the headset by pressing and holding the Power button for around 10
seconds.
11 Headset
To Next Page
Loading...
