Setting up VIVE Focus Plus
Setting up VIVE Focus Plus is fast and easy. You'll be immersed in VR in no time.
Before setting up VIVE Focus Plus, do these:
§ Prepare a clear and safe area, at least 2m x 2m, that is indoors.
§ Charge the headset first. See Charging the headset on page 12.
§ Remove the protective films that are covering the tracking sensors and the headset lenses.
§ Make sure to put the batteries inside both controllers. See Inserting the batteries into a
controller on page 27.
§ Remember the wireless network name you want to connect to and its password.
§ Sign up for a VIVEPORT
™
account as you will need one to log in to VIVEPORT. To sign up for
one, go to focus.viveport.com
1. Turn on the headset. See Turning on the headset on page 11.
2. Wear the headset. See Putting on the headset on page 13.
3. Pick up both controllers and then press and hold the VIVE button on each controller for a
few seconds to turn them on and start the pairing process. The pairing is successful when
the controllers vibrate for a few seconds.
4. Follow the instructions in the headset to complete the setup. To select objects or press
buttons onscreen, point to the object or button using the controller with the beam and
then press the Trackpad.
5. During the setup process, you'll be asked to:
§ Choose the language to use.
§ Go through a simple tutorial to learn about the controller functions.
To go through the tutorial again after setting up VIVE Focus Plus, go to
Settings Tutorial.
§
Connect to a Wi-Fi
®
network. See Connecting to a wireless network on page 18.
§ Sign into VIVEPORT.
6. After you're done setting up, you'll be taken to VIVE Home. See Using VIVE Home on page
30.
9 Unboxing
To Next Page
Loading...
