If you have long hair, position the back head support above the base of your skull.
3. Tighten the velcro straps and Adjustment dial until you find your preferred fit. Do not push
to tighten the back head support. The fit should be snug.
Always use the Adjustment dial to tighten the back head support. Do not push it in.
Plugging in your headphones
Listen using the built-in speakers. For a more immersive experience, plug in your own pair of
headphones or earphones.
§ Plug in your headphones to the 3.5mm headset jack at the bottom of the headset.
§ Press the Volume buttons on the bottom left side of the headset to adjust the volume.
14 Headset
To Next Page
Loading...
