45
1. Click “Load CSV File” to load CSV file. All the content will be shown on the table.
NOTE: For many CSV editor, opened file is exclusively occupied. You need to close this
file first, then load it with HPT.
2. Modify csv file if need. You can add rows, edit content or save this table as another file.
3. Choose to encrypt the generate files or not.
4. If built-in HTTP server has started, you can check “Autofill Server Path” to autofill the
cfg server path and firmware server path. If you want to learn about how to start built-in
HTTP server, please refer to 18.2.1 Step 1.
5. Click “Batch” to generate cfg files and save them in the desired directory, or click “Batch
to Built-in Server” to generate and store them in the built-in HTTP server file directory
(\server\htdocs\cfg and \server\htdocs\fw).
To Next Page
Loading...
