Do you have a question about the Htek UC926E and is the answer not in the manual?
SIP Accounts | 6 |
---|---|
PoE | Yes |
Bluetooth | No |
USB Ports | 1 x USB 2.0 |
HD Audio | Yes |
Wi-Fi | No |
Humidity | 10% to 90% (non-condensing) |
Audio Codecs | G.711, G.722, G.726, G.729A, iLBC, OPUS |
Network | 10/100/1000 Mbps dual-port Gigabit Ethernet, Bridge and Router mode |
Headset Jack | Yes (3.5mm) |
Dimensions | 220mm x 190mm x 65mm |
Protocols | SIP, TLS, SRTP, IPv6 |
Local Phonebook | 1000 entries |
Operating Temperature | 0°C to 40°C |
Display | 2.8" 320x240-pixel color LCD with backlight |
Details regarding copyright ownership and usage rights of the document.
Essential guidelines for safe and proper operation of the Htek IP Phone.
Guidance on the environmentally sound disposal of electrical and electronic equipment.
Statement on the device's compliance with FCC rules for radio frequency emissions.
Lists all components included in the Htek IP Phone package for user verification.
Step-by-step instructions for physical setup and installation of the IP phone.
Describes the boot-up sequence and initial configuration steps of the IP phone.
Instructions on how to check and interpret the phone's current status information.
Guide to accessing and logging into the phone's web-based configuration interface.
Procedures for changing the administrator password for security and access control.
How to customize the phone's screen display mode and user interface language.
Steps to configure network settings like IP address, DHCP, and connection types.
Guide to assigning specific features or actions to the phone's function keys.
How to enable, pair, and use Bluetooth headsets with the IP phone.
Instructions for enabling, connecting, and managing Wi-Fi networks on the phone.
Details on setting up always, busy, and no-answer call forwarding rules.
Solutions for common problems like blank LCD screens and network unavailability.
Guidance for resolving issues with Bluetooth headset detection and Wi-Fi connection.
Procedures for downloading and managing XML configuration files for the phone.