Htek UC926E - Line

Function Key Features and
Settings
119
line key as cancel:
Line Label Length: if this option is set Long label, then the label’s length will be longer, it
is used if the string is too long.
Line Page Indicator: Enable this option When the phone has been configured for four
pages and current page is first page, the forth page has a BLF and BLF’s status is
changed, then the forth page’s button will flash the red indicator.
UC926E has 36 Function Keys.
Line
It works same as Line keys.
Line support three Mode (Default, lock and float)
Default mode: If there is an incoming call, the phone won’t navigate to the set line key
account page if the line key page is set as line type and current page is page four.
Lock mode: If there is an incoming call the line key set account will reflect on the same
position on every page when the first page set as the line type.
Float mode: If there is an incoming call, the phone will navigate to the set line key
account page if the line key page is set as line type and current page is page four.
To configure Line Feature via Web interface
1. Click Function Keys → Line Key.
2. Select the wanted Key and set as Line.
3. Select the Account.
4. Click the button to save the configuration.