Basic Setting Configuration
47
4. Click to save the configuration.
To set Backlight via Web interface phone interface:
1. To press Menu → Display → Backlight
2. Press or to change the Backlight Active Level
3. Press or to change the Backlight Inactive Level.
4. Fill the Backlight Time.
5. Press or Save soft key to save the configuration.
Note:
1. Backlight Active Level is used to adjust the brightness of backlight
2. Backlight Inactive Level controls the backlight is all dark or brightness can be
adjusted
3. Backlight Time refers to the time into the backlight
Time and Date
Time and date is displayed on the idle page, and it can be set automatically by SNTP
server or manually by manual setting.
To Next Page
Loading...
