Basic Setting Configuration
60
IPv6
If you set IP Mode to IPv6,IP phone will use IPv6 address. IPv4 has two network modes:
DHCP, Static
To configure IPv6 via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN
Port → IP Port Mode.
2. Press or to change the IP Port Mode..
3. Press or Save soft key to save the configuration.
To configure IPv6 via Web interface:
1. Click Network→ Basic→ Internet Port
2. Select IPv6 for Internet Port
3. Click for the setting.
To configure DHCP via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN
Port IPv6→ DHCP mode.
To Next Page
Loading...
