Getting Started
15
Then IP Phone will show Reboot information:
By default, the phone attempts to contact a DHCP server in your network in order to obtain
its valid network settings, e.g. IP address, subnet mask, default gateway, DNS server.
Status
You can view the system status of your phone via phone user interface or web user
interface. The information of phone status includes: Information (e.g., Model, IPV4,IPV6,
MAC, Firmware, Hardware), Network (e.g., WAN Type, IP, Mask, LAN Type, Gateway,
DNS …) Account (e.g., register status of accounts)
To view the phone status via Phone interface:
1. Press Menu →Status →Information
To Next Page
Loading...
