4
apply to all phone models.
The line beginning with “#” is considered to be the annotation, and easy to understand
each P value.
The parameters commonly edited in the cfg$mac file are described as follows:
#######################################################################
#############
## Configuration template for UC924 firmware version 1.0.3.70
#######################################################################
#############
#######################################################################
#############
# Account Settings
#######################################################################
#############
#---------------------------------------
# Account 1--basic setting
#---------------------------------------
# Account Active (In Use). 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P271 = {$line_active.line.1|1}
# Primary SIP Server(eg:sip.mycompany.com or IP address)
# String
P47 = {$server_host.line.1}
# Failover SIP Server(Optional, used when primary server no response)
# String
P967 =
# Second Failover SipServer(Optional, used when Failover SIP Server no response)
P8851 =
# Prefer Primary SIP Server(Yes-will register to Primary SIP Server if Failover registration
expires )
# Prefer Primary SIP Server (In Use). 0 - No, 1 - Yes
# Number: 0, 1
# Mandatory
P4567 = 0
# Outbound Proxy(proxy.myprovider.com, or IP address, if any)
# string
P48 =
To Next Page
Loading...
