Htek UC601 - Page 91

88
Early-Session
Account(2)->
Advanced ->
Refuse-Return-Co
de
Number:
0-2
Refuse-Return-Code.
0 -BUSY-486, 1 -
NOT-FOUND-404, 2 -
REFUSE-603
P8846
×
√
√
Account(2)->
Advanced ->Direct
Call Pickup Code
string
Direct Call Pickup
Code
P4715
×
√
√
Account(2)->
Advanced
->Group Call
Pickup Code
string
Group Call Pickup
Code
P4716
×
√
√
Account(2)->
Advanced ->
Feature Key Sync
Number:
0, 1
Feature Key Sync. 0 -
Disable, 1 - Enable
P8634
×
√
√
Account(2)->
Advanced -> SIP
Send Mac
Number:
0, 1
SIP Send Mac.0 -
Disable,1 - Enable
P20054
×
√
√
Account(2)->
Advanced ->Caller
Display Source
Number:
0, 1,2,3,4
Caller Display
Source.0 – From
Only, 1 – PAI-FROM,
2 – PAI-RPID-FROM,
3 –
RPID-PAI-FROM,4 –
RPID-FROM
P20158
×
√
√
Account(3)->basic
->Account Active
Number:
0, 1
Account Active (In
Use). 0 - No, 1 - Yes
P501
×
√
√
Account(3)->basic
->Primary SIP
Sserver
Primary
SIP
Server(eg:s
ip.mycomp
any.com or
IP address)
It configures the
primary SIP server
when the network is
locallan 、remotestun
or SBC.
P502
×
√
√
Account(3)->basic
->Failover SIP
Server
String
Failover SIP
Server(Optional,
used when primary
server no response)
P988
×
√
√
Account(3)->basic
->Second Failover
SIP Server
String
Second Failover
SipServer(Optional,
used when Failover
SIP Server no
response)
P8853
×
√
√
Account(3)->basic
->Prefer Primary
Number:
0, 1
Prefer Primary SIP
Server (In Use). 0 -
P4569
×
√
√