Htek UC926E Configuration Guide

Home
PBXware
SERVERware
TELCOware
SIPmon
SIPProt
Desktop & Mobile
BRM
UADs
Appliances
EOL
From Bicom Systems Wiki
Contents
1 Introduction
■
2 Requirements
■
2.1 Identifying phone model
■
2.2 Phone firmware
■
2.3 DHCP server
■
2.4 PBXware version
■
3 Installation
■
3.1 Power adapter
■
3.2 Power over Ethernet (PoE)
■
3.3 Find the phone IP address
■
3.4 Reset to factory settings
■
4 Registering phone
■
4.1 Manual configuration
■
4.2 Auto Provisioning
■
5 Configure BLF
■
5.1 Etension Settings
■
5.2 Phone Settings
■
6 Additional Configuration Template
■
Introduction

Htek UC926E Specifications

General

SIP Accounts	6
PoE	Yes
Bluetooth	No
USB Ports	1 x USB 2.0
HD Audio	Yes
Wi-Fi	No
Humidity	10% to 90% (non-condensing)
Audio Codecs	G.711, G.722, G.726, G.729A, iLBC, OPUS
Network	10/100/1000 Mbps dual-port Gigabit Ethernet, Bridge and Router mode
Headset Jack	Yes (3.5mm)
Dimensions	220mm x 190mm x 65mm
Protocols	SIP, TLS, SRTP, IPv6
Local Phonebook	1000 entries
Operating Temperature	0°C to 40°C
Display	2.8" 320x240-pixel color LCD with backlight