EasyManua.ls Logo

HTP EL-80 - Page 70

HTP EL-80
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LP-293 Rev. 9.24.15
70
Elite™ Boiler
Limited Warranty
Twelve year warranty to assure your complete satisfaction.
HTP warrants each Elite™ boiler to be free from defects in material
and workmanship according to the following terms, conditions, and
time periods. UNLESS OTHERWISE NOTED THESE WARRANTIES
COMMENCE ON THE DATE OF INSTALLATION.
COVERAGE
A. HTP warrants that it will repair or replace, at its option, without
charge, any defective Elite™ boiler or malfunctioning component
thereof that is found to have failed due to manufacturer’s defect
during the first year after installation (with the exceptions of the
Elite™ Blower Motor, which will have a limited warranty of 3
years). HTP will NOT accept claims from the purchaser for labor
costs incurred as a result of the repair, replacement, removal, or
reinstallation of an Elite™ boiler or any component thereof. It is
expressly agreed between HTP and the purchaser that repair or
replacement are the exclusive remedies of the purchaser.
B. During the second through twelfth years after the date of
installation, HTP will repair or replace, at its option, any defective
Elite™ boiler found to have failed due to a leaking heat exchanger
at a cost to the purchaser equal to the following percentages of the
manufacturer’s list price in effect at the date of replacement.
Year of Claim 2-7 8 & 9 10 & 11 12
Percentage to be Paid
by Purchaser
0 % 25 % 50 % 75 %
No other component of the boiler will be replaced during this
period. HTP will NOT accept claims from the purchaser for labor
costs incurred as a result of the repair, replacement, removal or
reinstallation of an Elite™ boiler or any component thereof. It is
expressly agreed between HTP and the purchaser that repair or
replacement are the exclusive remedies of the purchaser.
C. Should a defect or malfunction result in a leakage of water
within the above-stated warranty periods due to defective material
or workmanship, malfunction or failure to comply with the above
warranty, such as defects or malfunctioning having been verified by
an authorized HTP representative, HTP will replace the defective or
malfunctioning Elite™ boiler with a replacement boiler of the nearest
comparable model available at the time of replacement.
D. If HTP is unable to repair or replace an Elite™ boiler so as to
conform to this warranty after a reasonable number of attempts,
HTP will then provide, at its option, a replacement unit. These
remedies are the purchaser’s exclusive remedies for breach of
warranty.
E. If, at the time of a request for service the purchaser cannot
provide a copy of the original sales receipt or the warranty card
registration, the warranty period for the Elite™ boiler shall then be
deemed to have commenced thirty (30) days after the date of
manufacture of the Elite™ boiler and NOT the date of installation.
F. This warranty extends only to Elite™ boilers utilized in closed
loop heating applications that have been properly installed based
upon manufacturer’s installation instructions. The use of the Elite™
boiler for potable water-heating shall void any coverage under this
warranty.
G. Replacement parts will be warranted for ninety (90) days.
OWNER’S RESPONSIBILITIES
To avoid the exclusion list in this warranty, the owner or installer
must:
1. Maintain the boiler in accordance with the maintenance procedure
listed in the installation manual. Preventive maintenance can help
avoid any unnecessary breakdown of the boiler and keep it running
at optimum efficiency.
2. Ensure all related heating components are properly maintained
and kept in good operating condition.
3. Check condensate lines to confirm that all condensate drains
properly from the boiler.
4. Use the boiler in a closed system with a properly sized and
installed thermal expansion tank.
5. Make provisions so if the boiler or any component part thereto
should leak, the resulting flow of water will not cause damage to
the area in which it is installed.
6. Operate the boiler at water pressures not exceeding the working
pressure shown on the rating plate.
WARRANTY EXCLUSIONS
HTP does not warrant:
1. All labor charges incurred by any person in connection with the
examination or replacement of parts claimed by the purchaser to
be defective.
2. Any failed components of the heat system not manufactured by
HTP as part of the Elite™ boiler.
3. Boilers repaired or altered without prior written approval of HTP
so as to adversely affect their reliability.
4. Any damages, defects or malfunctions resulting from improper
maintenance, misuse, abuse, accident, negligence, freezing and
the like.
5. Any damage or failure resulting from hard water scale buildup
on the heat exchanger.
6. Any damage or failure resulting from contaminated air, including,
but not limited to, sheetrock particles, plasterboard particles, dirt or
dust, being introduced into the boiler or its components including,
but not limited to, the heat exchanger.
7. Damages, malfunctions, or failures resulting from failure to install
the boiler in accordance with applicable building codes/ordinances
or good plumbing and electrical trade practices.
8. Damages, malfunctions, or failures resulting from improper
installation, failure to operate the boiler at pressures not exceeding
the working pressure shown on the rating plate, or failure to maintain
and operate the boiler in accordance with the printed instructions
that accompany the unit.
9. Failure to operate the boiler in a closed system with a properly
sized expansion tank.
10. Failure or performance problems caused by improper sizing
of the boiler, piping, expansion device, gas supply line, venting
connection, combustion air openings, electric service voltage,
wiring, or fusing.
11. Any damage or failure resulting from improper water chemistry.
WATER CHEMISTRY REQUIREMENTS – Sodium less than
20mGL. Water pH between 6.0 and 8.0. Hardness less than 7
grains. Chlorine concentration less than 100 ppm.
12. Any damages, malfunctions, or failures resulting from the use
of dielectric unions.
13. Components of the boiler that are not defective, but must be
replaced during the warranty period as a result of reasonable wear
and tear.
14. Components of the boiler that are subject to warranties, if any,
given by their manufacturers; HTP does not adopt these warranties.
15. Malfunctions resulting from, or repairs necessitated by, flood,
fire, wind, or lightning, or uses of the boiler for purposes other than
that for which it was designed.
16. Any unit purchased from an unauthorized dealer or any online
retailer.
17. Units installed outside the fifty states (and the District of
Columbia) of the United States of America and Canada.
PROCEDURES FOR WARRANTY SERVICE REQUESTS
Any claim for warranty assistance must be made promptly. Any

Table of Contents

Other manuals for HTP EL-80

Related product manuals