4
PROFICALK
– The permissible ambient temperature (room temperature) must not fall below
or exceed 0 °C and 40 °C during operation.
– The device must not be brought close to strong high-frequency fields, as the
device can enter an undefined operating state!
– The device may only be repaired by a trained electrician!
– It is essential to ensure compliance with the technical data given in these
instructions! Exceeding these values can lead to damage to the device or
consumer.
– If the device needs to be repaired, only original spare parts may be used!
The use of different spare parts can lead to serious property damage and
personal injury!
– Never place heavy objects on the power cord or bend it in too tight a radius
or around sharp corners.
– In schools, training institutions, hobby and self-help workshops, the operation
of assemblies must be monitored responsibly by trained personnel.
– When unplugging the power cord, only pull on the plug and never on the
cable.
– The device must not be used in conjunction with highly flammable and
combustible liquids!
– In commercial facilities, the accident prevention regulations of the Association
of Commercial Professional Associations for electrical systems and equipment
must be observed.
– If the power cord is damaged, it may only be replaced by a trained electrician.
– The device may only be operated on 230 V/50 Hz alternating voltage.
– Protect this device from moisture, splash water and heat!
When handling products that come into contact with electrical voltage, the
valid VDE regulations must be observed, in particular VDE 0100, VDE 0701,
and VDE 0550/0551.
– If condensation forms, an acclimatization period of up to 2 hours must be
allowed.
– The device is intended for use in dry and clean rooms.
Machine Translated by Google
To Next Page
Loading...