5. MONTAGE
PKS 2000 PLUS X 7
The first four procedures are currently considered technically outdated and are
significantly less effective. That's why capacitive impulse technology was selected
for the PKS 2000 plus X.
5. capacitive pulse technique with variable resonance frequency technology
– Thick paint (e.g. wall paint) should be removed from the water pipe in the area
of the cable windings. Thin protective coatings do not interfere.
4. electromagnetic method with alternating fields
– Both impulse cables are wrapped around the pipe as shown in Fig. p. 8. )
3. electromagnetic method without alternating fields
– A water flow direction does not have to be taken into account.
2. electro-physical method (E-field)
– The impulse cables can be wound left and right, but also underneath the
electronics part if there is little space available.
– The device can be mounted horizontally and vertically.
1. a permanent magnet
Water cages can be broken using:
– The PKS 2000 plus X should be attached in the area of the water meter and
distribution. (see fig.)
Physical water treatrs do not change the original water quality, but only the
crystallization behavior of the lime. A limescale suspended substance is created
that is washed away with the flowing water and washed out. When a water stain
dries up, the treated lime becomes visible as minerals cannot evaporate but rather
remain on the surface, e.g. B. in the bathtub. However, this limescale stain can
be easily wiped away with a damp cloth. This means that not only do pipes and
devices remain intact, but household maintenance also becomes noticeably
easier and more convenient.
– The PKS 2000 plus X can be used for any pipe material, i.e. for iron, copper,
stainless steel and plastic pipes.
Machine Translated by Google
To Next Page
Loading...